The Boss Trailed is a two bale feeder that carries the second bale on its unique loading forks while the first sits in the cradle.
It’s the curved loading forks separates this feeder from its competitors by picking up and carrying the second bale instead of stabbing it, eliminating the need to get out of the tractor to take off net wrap around rota cut bales. The bale stays firmly together instead of falling apart, as can happen when the bale is stabbed.
The curved forks also make backing into the second bale easy and visible, as the bale is guided in by the curve. The forks are just 40mms off the ground, high enough that they don’t dig up the ground, but low enough to provide stability because the bale doesn’t have to be lifted too high to be placed in the feeder. The bale goes onto a sliding table which puts it into the correct place in the cradle every time.
The feeder cradle is made out of one piece of rounded 3mm steel, making it light, yet extremely strong. Top quality solid pin chain, with a breaking strain of 15 000lb, is used and the chain does not stretch.
FEEDS OUT BOTH SIDES
The Boss Trailed is designed to feed out from both sides so it doesn’t matter which way in the bale is loaded. This also makes it easy to work on the side of a hill as it can always be fed out uphill for safety and stability.
WIDE WHEEL BASE
For extra stability, especially when working on the side of a hill, the wheel base is perfectly proportioned so that the cradle will not tip and the bale will not roll out. The wheels do not run over the windrow as they travel just inside allowing full utilization of feed.
ROUND AND SQUARE BALES
The Boss Trailed is designed to feed out both round and square bales (with the addition of a square bale kit)* efficiently, eliminating the need to buy a second machine.
- Weight 1,650lbs
- Width Wheelbase 5.5ft
- Length 14.4ft
- Hydraulics 2 x double acting
- Size of bales (Round) 4′ X 4′ - 4′ X 6′
- Number of Bales 2
- Drive System Direct drive